銅及銅合金牌號對照表
CONVERSION TABLE OF GRADES FOR COPPER & ITS ALLOYS
| 類別 | 中國 | 美國 | 英國 | 西德 | 日本 | ||
| GB | ASTM | CDA | BS | DIN | 數字系統 | JIS | |
| 純銅 | T2 | C11000 | 110 | C102 | ECu-58 | 2.0090 | C1100 |
| 無氧銅 | TU1 | C10200 | 102 | C103 | OF-Cu | 2.0040 | C1020 |
|
磷脫 |
TP1 |
C12000 C12100 C12200 |
- |
C106 |
SW-Cu |
2.0076 2.0090 |
C1201 |
|
含銀 |
TAg0.08 |
C13000 C12900 |
130 |
C101 - |
CuAg0.1 |
- |
C1271 |
|
普 通 黃 |
H96 H63 |
C21000 |
210 240 |
CZ125 |
CuZn5 |
2.0220 |
C2100 |
| 鉛
黃 銅 |
HPb63-3 |
C34500 C34700 C34900 C36000 C35300 C37800 C38000 |
345 347 - - - - - |
CZ119 CZ124 - CZ120 - CZ122 CZ121 |
CuZn36pb1.5 |
2.0331 2.0332 - 2.0380 2.0401 |
C3560 - C3713 C3604 C3771 C3710 C3603 |
| 黃銅棒 BRASS BAR |
| 成分牌號 ALLOY SPECIFICATION |
公稱外徑OUSIDE DIAMETER（mm) | 5～6 | 6.5～10 | 11～18 | 19～30 | 32～50 | 52～80 | |
| (GB)H62 | -0.08 | -0.09 | -0.11 | -0.13 | -0.25 | -0.30 | ||
| (GB)HPb59-1 HPb63-3 |
外徑公差
TOLERANCE |
普通normal
中級middle 高級senior |
-0.12 | -0.15 | -0.18 | -0.21 | -0.39 | -0.46 |
| -0.08 | -0.09 | -0.11 | -0.13 | -0.25 | -0.30 | |||
| -0.05 | -0.06 | -0.07 | -0.07 | -0.16 | -0.19 | |||
| （GB）H62 |
力學性能 |
公稱外徑（mm）OUSIDE DIAMETER | ||||||
| 5～40 | 40～80 | |||||||
| 抗拉強度TENSILE STRENGTH（N/mm2) | ≥373 | ≥333 | ||||||
|
延伸率 §10(%)ELONGATION |
≥15 | ≥20 | ||||||
| （GB）HPb59-1 |
力學性能 |
公稱外徑(mm）OUSIDE DIAMETER | ||||||
| 5～40 | 20～40 | 20～80 | ||||||
| 抗拉強度TENSILE STRENGTH（N/mm2) | ≥422 | ≥392 | ≥373 | |||||
|
延伸率 §10(%)ELONGATION |
≥10 | ≥12 | ≥16 | |||||
| （GB）H63-3 Y |
力學性能 |
公稱外徑（mm)OUSIDE DIAMETER | ||||||
| 5～9.5 | 9.5～14 | 14～20 | 20～30 | |||||
| 抗拉強度TENSILE STRENGTH（N/mm2) | ≥510 | ≥490 | ≥451 | ≥412 | ||||
| 延伸率 §10(%)ELONGATION | ≥2 | ≥5 | ≥8 | ≥10 | ||||
| （GB）H63-3 Y2 | 力學性能 MECHANICS PROPERTY |
|||||||
| 10～20 | 20～60 | |||||||
| 抗拉強度TENSILE STRENGTH（N/mm2) | ≥353 | ≥324 | ||||||
| 延伸率 §10(%)ELONGATION | ≥12 | ≥16 | ||||||
注：1.經協商可供應其它狀態及形狀的產品。 2.棒材規格指圓棒直徑、如方棒及多角形棒指內切圓直徑。
Remark:1.To supply other types and shapes of product if agreed. 2.Rod material specification regarding to the diametre of round rod.Square rod and multi-shaped rod regarding to inside diametre.
以上信息僅供參考
